optoway TRSL-3380W-CXX0G *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v3.0 1 TRSL-3380W-CXX0G 3.3v / cwdm / 155 mbps sff 2x10 lc single-mode transceiver ********************************************************************************************************************************************************************** features l duplex lc single mode transceiver l sonet oc-3 lr-2 / sdh stm-1 (l-1.2) compliant l small form factor, rj-45 size, 2x10 pin package l 18-wavelength cwdm dfb ld transmitter from 1270 nm to 1610 nm, with step 20 nm l 29 db link budget at least l analog monitor function -- transmitter laser bias current -- transmitter laser optical power monitor -- receiver photo detector current l lvpecl signal input / output l lvttl transmitter disable input l lvttl signal detection output l single +3.3 v power supply l 0 to 70 o c operation l wave solderable and aqueous washable l class 1 laser international safety standard iec 60825 compliant applications l atm 155 mbps links l sonet/sdh equipment interconnect l fast ethernet 100 mb/s links description the TRSL-3380W-CXX0G series single mode transceivers is low power, high performance cwdm modules for bi-directional serial optical data communications such as long-reach sonet oc-3 lr / sdh stm-1 and fast ethernet. there are eighteen center wavelengths available from 1270 nm to 1610 nm, each step 20 nm. a guaranteed minimum optical link budget of 29 db is offered. the transmitter section uses a multiple quantum well dfb laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a pecl logic interface simplifies interface to external circuitry. laser safety this single mode transceiver is a class 1 laser product. it complies with iec 60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (mb/s) sdh/ sonet power budget (db) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant TRSL-3380W-CXX0G 155 lr-2/l-1.2 29 cwdm * 2x10 lc 0 to 70 0 to -5 -34 yes cwdm wavelength (0 to 70 o c) central wavelength min. (nm) typ. (nm) max. (nm) central wavelength min. (nm) typ. (nm) max. (nm) -c270 1264.5 1270 1277.5 -c450 1444.5 1450 1457.5 -c290 1284.5 1290 1297.5 -c470 1464.5 1470 1477.5 -c310 1304.5 1310 1317.5 -c490 1484.5 1490 1497.5 -c330 1324.5 1330 1337.5 -c510 1504.5 1510 1517.5 -c350 1344.5 1350 1357.5 -c530 1524.5 1530 1537.5 -c370 1364.5 1370 1377.5 -c550 1544.5 1550 1557.5 -c390 1384.5 1390 1397.5 -c570 1564.5 1570 1577.5 -c410 1404.5 1410 1417.5 -c590 1584.5 1590 1597.5 -c430 1424.5 1430 1437.5 -c610 1604.5 1610 1617.5 cwdm * : 18 wavelengths from 1270 nm to 1610 nm, each step 20 nm.
optoway TRSL-3380W-CXX0G *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v3.0 2 absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr 0 70 o c with air flow 1m/sec soldering temperature --- 260 o c 10 seconds on leads only power supply voltage vcc 0 4.5 v input voltage --- gnd vcc v output current iout 0 30 ma recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating temperature topr 0 70 o c / air flow 1m/sec data rate 125 / 155 200 mb/s power supply current icc 200 280 ma transmitter specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -5 --- 0 dbm 1 output center wavelength l l -5.5 l l +7.5 nm 2 output spectrum width dl --- --- 1 nm -20 db width side mode suppression ratio smsr 30 db extinction ratio e r 10 --- --- db output eye compliant with bellcore gr-253-core and itu recommendation g.957 optical rise time t r 2 ns 10% to 90% values optical fall time t f 2 ns 10% to 90% values relative intensity noise rin -120 db/hz total jitter tj 1 ns 3 electrical data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 300 mv data input voltage C low v il - v cc -2.0 -1.58 v 4 data input voltage -- high v ih - v cc -1.1 -0.74 v 4 disable input voltage -- low v tdis,l 0 0.5 v tx output enabled disable input voltage -- high v tdis,h vcc C 1.3 vcc v tx ouput disabled shut off time for txdis t dis 1 ms notes: 1. output power is power coupled into a 9/125 m m single mode fiber. 2. itu-t g.694.2 cwdm wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. measured with a 2 23 -1 prbs with 72 ones and 72 zeros. 4. these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs.
optoway TRSL-3380W-CXX0G *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v3.0 3 receiver specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical sensitivity --- --- --- -34 dbm 1 maximum input power pin -3 --- dbm signal detect -- asserted pa --- --- -34 dbm transition: low to high signal detect -- deasserted pd -47 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 1100 --- 1620 nm electrical data output voltage C low v ol - v cc -2.0 -1.58 v 2 data output voltage C high v oh - v cc -1.1 -0.74 v 2 signal detect output voltage -- low v ol 0.5 v signal detect output voltage -- high v oh 2.0 v notes: 1. minimum sensitivity and saturation levels at ber=1e-10 for a 2 23 -1 prbs with 72 ones and 72 zeros. 2. these outputs are compatible with 10k, 10kh and 100k ecl and pecl outputs. analog diagnostics functions parameter symbol min typ max units notes transmitter laser bias current monitor bmon+, bmon- 0 vcc v 1 monitor photodiode current monitor pmon+,pmon- 0 vcc v 2 receiver received photocurrent rpd 0 1 ma 3 photodiode responsivity r 0.5 0.9 1.0 a/w applied voltage at vpdr pin vpd 2.4 vcc v 3 notes: 1. pin 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following formula: ibias = v (bmon+ - bmon-) / 10 . see below the equivalent circuit. 2. pin 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the following formula: imon = v (pmon+ - pon-) / 200 . see below the equivalent circuit. 3. pin 1 is used to monitor the received photocurrent. it must be connected to a positive voltage within the specified above. the received power is given by the photocurrent multiplied by the photodiode responsivity. rx pd t vpdr monitor pd 200ohm vcc control circuit pmon+ pmon- 3k 3k ld 10ohm vcc bias circuit bm+ bm- 3k 3k i bias i mon i pd analog monitoring function connections
optoway TRSL-3380W-CXX0G *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v3.0 4 connection diagram pin symbol notes pin symbol notes 1 vpdr receiver power monitor. this pin must be connected to a positive power supply (vcc), preferably via a small resistor. supplier photocurrent and maybe u sed to monitor receiver power. 11 vcct +3.3v dc transmitter power supply 2 veer receiver ground. 12 veet transmitter ground. 3 veer receiver ground. 13 t dis transmitter disable. connect this pin to logic 1 to disable module. to enable module connect to logic low 0 4 nc no connected 14 td + transmitter data in 5 nc no connected 15 td - transmitter data in bar 6 veer receiver ground. 16 veet transmitter ground. 7 vccr +3.3v dc receiver power supply 17 bmon - laser bias monitoring C negative end 8 sd signal detect. logic 1 indicate a normal operation. 18 bmon+ laser bias monitoring C positive end (bmon+ - bmon-) = 10 x laser bias current 9 rd - receiver dataout bar 19 pmon- laser power monitoring -- negative end 10 rd+ receiver dataout 20 pmon+ laser power monitoring -- positive end (pmon+ - pmon-) = 200 x monitor photdiode current ms ms mounting studs. connect to chassis ground recommended circuit schematic v p d r 1 v e e r x 2 v e e r x 3 n c 4 n c 5 v e e r x 6 v c c r x 7 s d 8 r d - 9 r d + 1 0 v c c t x 1 1 v e e t x 1 2 t d i s 1 3 t d + 1 4 t d - 1 5 v e e t x 1 6 b m o n - 1 7 b m o n + 1 8 p m o n - 1 9 p m o n + 2 0 tx rx microstrip2 z=5or microstrip1 z=50r 1uh 100nf 10uf 100nf vcc3.3v 1uh 10uf 100nf microstrip4 z=5or microstrip3 z=50r phy device td- td+ rd+ rd- sd vcc3.3v lvpecl vcc3.3v lvpecl to lvpecl stage tdis(lvttl) bmon- bmon+ pmon+ pmon- 10nf 200r 3k vccrx(3.3v) vpdr 130r 82r vcc3.3v 130r 82r vcc3.3v 150ohm 150ohm 1k note: 1. tx input is terminated inside the module. 2. veer and veet are not internally connected to each other. 3. 50 line pattern and component placements on td+/td- and rd+/rd- lines shall be symmetrical for better impedance matching.
optoway TRSL-3380W-CXX0G *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v3.0 5 package diagram units in mm 1) standard case TRSL-3380W-CXX0G 2) extended case trsl-3380we-cxx0g note: specifications subject to change without notice.
|
